 |
 |
|
|
 | |
|
|
 | |
|
|
|
|
|
|
| |
|
|
|
| |
FREQUENTLY ASKED QUESTIONS |
||
| 1. How long does it
take to dry? 4-6 hours depending on temp. 2. What is the size of the aerosol can? 20 oz. can with a 12 oz. Net Wt. (340 Grams.) 3. What would be normal coverage per can? About 30 sq ft per can depending on substrate. 4. What would be clean-up solvent? For wet material, use mineral spirits. 5. Is it Prop. 65? Yes 6. What can be used to remove the Graffiti Gard coating? Because the Graffiti Gard is chemically resistant, a heavy stripper or abrasive action will remove it. 7. What is the best method to remove paint and markings? An 'acetone' like cleaner and a water rinse (not pressure wash) is ample for removal. As well, our Graffiti Wipes work very well on this product. See additional removal instructions on the Graffiti Gard Data Sheet. 8. What is the shelf life of the product? Two Years. 9. How long should you wait between coats? One Hour. 10. Is Graffiti Gard UV resistant? Yes. 11. What is ASTM D-6578? This practice covers a basic method for evaluating graffiti resistance of coatings, and use of this practice to evaluate graffiti resistance of coatings after outdoor or laboratory accelerated exposure. Graffiti resistance is based on how a defined set of markings is removed by a defined set of cleaning agents. 12. Is Graffiti Gard toxic? Please contact us for the Graffiti Gard MSDS sheet for this and more information. 13. Is Graffiti Gard flammable? Yes 14. Are there any special instructions for use? Yes. Be sure to invert the aerosol can after use and spray for at least 5 seconds to purge the nozzle. Failure to do this may cause can to malfunction. |
|
Send mail to info@syndyx.com with questions or comments
about this web site. |
|
|
|
Copyright © 2000-2009 SYNDYX | Last modified: Nov 4, 2009 | |